大学物理教学改革实践浅析——“问题导向”式学习的意义及应用

针对当前我国高校大学物理教学中存在诸多问题的现状,提出"问题导向"式教学的解决途径."问题导向"学习中"教"与"学"的方式有较大跨度的转变,它以学生为中心,以问题为导向,其中问题的设置环节对师生良好互动的实现至关重要.文章就振动内容问题的设计和提出进行简单应用尝试,以期为后续大学物理教学改革的持续进行提供帮助.     

The Generalized Uncertainty Principle

The uncertainty principle lies at the heart of quantum physics, and is widely thought of as a fundamental limit of the measurement precision of incompatible observables. Here it is shown that the traditional uncertainty relation in fact belongs to the leading order approximation of a generalized uncertainty relation. That is, the leading order linear dependence of observables gives the Heisenberg type of uncertainty relations, while higher order nonlinear dependence may reveal more different and interesting correlation properties. Applications of the generalized uncertainty relation and the high order nonlinear dependence between observables in quantum information science are also discussed.     

Temperature Dependent In-Plane Anisotropic Magnetoresistance in HfTe_5 Thin Layers

We report the observation of in-plane anisotropic magnetoresistance and planar Hall effect in non-magnetic HfTe₅ thin layers.The observed anisotropic magnetoresistance as well as its sign is strongly dependent on the critical resistivity anomaly temperature T_p.Below T_p,the anisotropic magnetoresistance is negative with large negative magnetoresistance.When the in-plane magnetic field is perpendicular to the current,the negative longitudinal magnetoresistance reaches its maximum.The negative longitudinal magnetoresistance effect in HfTe₅ thin layers is dramatically different from that induced by the chiral anomaly as observed in Weyl and Dirac semimetals.One potential underlying origin may be attributed to the reduced spin scattering,which arises from the in-plane magnetic field driven coupling between the top and bottom surface states.Our findings provide valuable insights for the anisotropic magnetoresistance effect in topological electronic systems and the device potential of HfTe5 in spintronics and quantum sensing.     

大口径氘化磷酸二氢钾晶体离线亚纳秒激光预处理技术

大口径氘化磷酸二氢钾(DKDP)晶体抗激光损伤性能偏低严重地制约着大型高功率激光装置输出水平.本研究利用离线亚纳秒激光预处理技术有效地提升了大口径DKDP晶体抗激光损伤性能.实际使用情况表明,采用离线亚纳秒激光预处理后,DKDP晶体在9 J/cm²激光通量辐照下的表面平均损伤密度得到大幅下降,由未处理前的5.02 pp/cm²(1pp表示1个百分点)降至0.55 pp/cm²,降幅为一个数量级.同时,激光预处理对晶体损伤尺寸具有一定的抑制作用,预处理后晶体损伤点尺寸分布曲线向尺寸减小的方向平移,尺寸分布峰值由预处理前的25μm降至预处理后的18—20μm.     

Syngas production from methane over CeO2-Fe2O3 mixed oxides using a chemical-looping method

A series of mixed oxides Ce_{1 ? x} Fe _x O₂ was prepared by a hydrothermal method. XRD and Raman spectra were measured to study the structure of the prepared materials. The temperature-programmed reduction was undertaken to estimate reducibility of the oxides. Syngas generation from methane using these materials as oxygen carriers/catalysts via a chemical-looping procedure was investigated in detail. This procedure includes catalytic oxidation and decomposition of methane to produce H₂-rich gas at the first step followed by the production of the CO-rich gas by oxidizing the carbon deposited on deactivated catalysts. The results showed that all iron ions were incorporated into the ceria lattice with the formation of oxygen vacancies in the Ce_0.9Fe_0.1O₂ sample, while isolated Fe₂O₃ particles were distributed on the surface of the Ce_0.8Fe_0.2O₂ sample. TPR measurements and the analysis of the two-step chemical-looping reactions indicated a strong interaction between the Ce and Fe species which accounts for an increased activity of the mixed oxides in the syngas generation compared to that of individual oxides. Among the several samples, the Ce_0.8Fe_0.2O₂ catalyst showed the highest activity for methane partial oxidation due to the synergetic effects caused by the interaction of surface iron entities and Ce-Fe solid solution. In addition, selective oxidation of carbon by oxygen to CO can also be found over this material since gaseous products are formed at the carbon oxidation step with the selectivity to CO reaching 91.2%. Evidence is presented that syngas can be feasibly produced from methane with high selectivity via the chemical-looping procedure over the CeO₂-Fe₂O₃ mixed oxides.     

Catalytic behavior of decomposed molybdophosphoric acid supported on alumina for oxidative dehydrogenation of ethane to ethylene

Oxidative dehydrogenation of ethane (ODHE) to ethylene was investigated over a series of alumina supported molybdophosphoric acid (MPA) catalysts. The MPA was transformed into surface Mo oxides on Al₂O₃ when subjected to calcination at 600°C. The catalysts were characterized by N₂-adsorption, XRD, FT-IR spectroscopy and TPR techniques. The results showed that MPA loading and the source of Mo precursor had a clear influence on the catalytic performance. The evaluation of the catalysts for ODHE at temperatures between 450 and 550°C revealed superior ethane conversion (X～24%) and ethylene selectivity (S = ca. 65%) over 20 wt % MPA/Al₂O₃ catalyst. The transformation of MPA into finely dispersed Mo oxides on Al₂O₃ appeared to be responsible for this improved performance.     

Simple and Sensitive Multi-components Detection Using Synthetic Nitrogen-doped Carbon Dots Based on Soluble Starch

Journal of Fluorescence - Although carbon dots (CDs) as fluorescent sensors have been widely exploited, multi-component detection using CDs without tedious surface modification is always a...     

Persistence properties and wave‐breaking criteria for the Geng‐Xue system

Considered herein is a two‐component Novikov equations (called Geng‐Xue system for short) with cubic nonlinearities. The persistence properties and some unique continuation properties of the solutions to the system in weighted L_p spaces are established. Moreover, a wave‐breaking criterion for strong solutions is determined in the lowest Sobolev space by using the localization analysis in the transport equation theory, and we also give a lower bound for the maximal existence time.     

Ultrasound and Sonochemistry for Radical Polymerization: Sound Synthesis

The use of ultrasound as an external stimulus for promoting polymerization reactions has received increasing attention in recent years. In this Review article, the fundamental processes that can lead to either the homolytic cleavage of polymer chains, or the sonolysis of solvent (or other) small molecules, under the application of ultrasound are described. These reactions promote the production of reactive radicals, which can be utilized in chain-growth radical polymerizations under the right conditions. A full historical overview of the development of ultrasound-assisted radical polymerization is provided, with special attention given to the recently described systems that are “controlled” by methods of reversible (radical) deactivation. Perspectives are shared on what challenges still remain in polymer sonochemistry, as well as new areas that are yet to be explored.     

Impact of post-injection strategy on the physicochemical properties and reactivity of diesel in-cylinder soot

Post injection has significant benefit in the reduction of diesel soot emissions. Therefore, there is a need to understand the effect of post-injection strategy on soot physicochemical properties and reactivity because they play an important role in soot oxidation process that governs the final soot emissions. This work focuses on the impact of post injection on the physicochemical properties and reactivity of diesel in-cylinder soot using a main plus post injection (M*P) and a single injection (M) strategy. The soot was sampled by a developed total cylinder sampling system, and the dividing points of soot formation-dominant and oxidation-dominant phases were used for studying the impacts of post injection on the characteristics of in-cylinder soot. The physicochemical properties of the soot samples, including primary particle size, nanostructure, carbon chemical state and surface functional groups, were characterized. The soot reactivity was evaluated in terms of peak temperature, burnout temperature and apparent activation energy. In the oxidation-dominant phase, the M*P soot initially possesses smaller primary particle size, shorter fringe length, larger tortuosity, lower sp²/sp³ hybridization ratio of carbon atoms and higher content of aliphatic CH groups than the M soot. The beneficial influence of physicochemical properties on soot reactivity when using post injection is validated by the thermogravimetric data, which shows that the M*P soot is more reactive than the M soot at the onset of the oxidation-dominant phase. In the M*P case, the soot generated from the main-injection combustion has lower reactivity than the soot from the post-injection combustion after they experience the soot formation-dominant phase. The results indicate that the use of post injection leads to in-cylinder soot with physicochemical properties that favor reactivity. The enhancement of reactivity means that the soot will be more readily oxidized in the subsequent combustion process, and consequently contributes to a reduction in final soot emissions.